Minleon C9 L.E.D. retrofit bulbs come in a variety of colors, and screw into any C9, or intermediate, socket. This patented design is waterproof, long lasting, and the LED's are protected by hard acrylic plastic (rather than breakable glass, like regular incandescent bulbs), making them extremely durable. Saves 80-90% in electricity over a regular C9 bulb, and because LED's produce almost no heat, the bulbs are cool to the touch, greatly reducing the fire hazards often associated with Christmas tree lights. Our C9 bulbs have 5 LED's per bulb, and are UL listed to string up to 400 bulbs in one run.
Our bulk cord and slide on plug ends make it easy for you to create your own string of LED lights, and easy to replace any burned out bulbs in the years to come. You could also remove the bulbs from your old incandescent light string and replace them all with LED retrofit bulbs instead. Note: You must not mix LED bulbs with incandescent bulbs on the same string, or plugged end-to-end. Minleon's C9 LED retrofit bulbs screw into a C9 base, sometimes referred to as "intermediate" or "E17" base.
LED bulbs CAN NOT be mixed with incandescent bulbs.
Dimmable retrofit bulbs may be available upon request.
Create your own LED light string with Minleon C9 retrofit LED bulbs, C9 cord in either white or green, and
finish the cord ends with a slide-on male plug and slide-on female end connector. Very easy!